Automatic labeling machine accident handling common sense you know how much?
Classification: Technical Topics
Nov 28,2024
Especially in the use of mechanical equipment, master some small common sense, for us, that is very useful, can help quickly solve the problem, our automatic labeling machine is the same, then the automatic labeling machine accident processing common sense you know how much?
1, the adjustment of the label box:
Labeling box to grab the position of the labeling hook adjustment: up and down, left and right to grab the labeling hook in the same vertical plane and uniformly graze on the labeling paper, you can smoothly grab the label. Label paper in the label box and both sides of the pressure strip gap should be between 0.8mm ~ 1mm, the gap is too large to cause the label paper in the label box displacement, the appearance of oblique labeling, the gap is too small will cause the push labeling is not smooth. The center line of the label box, the center axis of the label station tangent to the label paper, the center axis of the label plate three points into a line, adjust the label plate tangent to the label paper (0 distance), and then move the label box closer to 1mm ~ 2mm can be. Label supply roller adjustment: in the absence of labels, labeling platen can be pressed to the forefront of the label box and equipped with labels, labels near the hook finger labels can not be crushed.
2, the adjustment of the labeling station:
Adjustment of the rubber roller and the label plate: the label plate and the rubber roller are only in contact with each other without any pressure. The gap is too large, the label plate is too much glue, resulting in glue dumping. The gap is too small, the contact is too tight, it will squeeze the glue away, and there is no glue on half of the label plate. Adjustment of scraping plate and rubber roller: scraping plate and rubber roller in the whole length can not appear gap, if there is a gap can be adjusted by adjusting the eccentric bolt to adjust the scraping plate. Practice has proved that the gap between the standard plate and the rubber roller is between 0.1mm and 0.2mm as the best. This can be achieved by adjusting the bearing seat of the lower part of the rubber roller, and if necessary, the upper part of the rubber roller bearing.
3、Adjustment of pressure brush device:
Adjustment of pressure head; pressure head in the absence of bottles should be 20mm lower than when there are bottles. pressure brush across the container overlap gap: a single pressure brush for 10mm ~ 15mm, combined pressure brush for 5mm ~ 10mm. cleaning brush from the sponge position of 1mm ~ 2mm. labeling the center of the brush and the label and symmetry of the two sides. Labeling brush is perpendicular to the surface of the container.
4、Adjustment of star wheel for bottle feeding, star wheel for bottle discharging and screw rod for bottle feeding:
Adjustment of the star wheel: when the bottle press head is just lifted, adjust the star wheel so that the bottle is located in the center of the groove of the star wheel. Adjustment of screw rod into the bottle: take the star wheel into the bottle as a guide, when the bottle is located in the middle of the groove of the star wheel into the bottle, adjust the screw rod, so that the screw rod into the bottle side of the bottle close to the bottle, but does not produce displacement. When making adjustments to the inlet and outlet star wheels and the bottle inlet screw rod, the bottle press head of the labeling machine shall prevail. First adjust the bottle inlet star wheel, when the bottle press head is just overpowering the bottle, adjust the bottle inlet star wheel so that the bottle is located in the middle of the star wheel groove.
Key words: Automatic labeling machine
Related Blog
Contact
E-mail :
794762602@qq.com
WhatsApp：
8615560107053
Address：
No.203, Zhongguancun e Valley (Zhengzhou) Business Incubator, No.27 West Section of Science Avenue, Shangjie District, Henan Province